Difference between revisions of "E-Beam Lithography (EBL)"
From OptoelectronicsWiki
Jaredhulme (Talk | contribs) (→Proximity Correction) |
Jaredhulme (Talk | contribs) (→Proximity Correction) |
||
Line 1: | Line 1: | ||
== Proximity Correction == | == Proximity Correction == | ||
− | * [[media:Proximity Effect Correction for Electron Beam | + | * [[media:Proximity Effect Correction for Electron Beam Lithography2.ppt|Proximity Effect Correction Experiment Updated]] |
** SEMs of Pure ZEP dosage array: [[file:Pure ZEP SEMs.zip]]<BR> | ** SEMs of Pure ZEP dosage array: [[file:Pure ZEP SEMs.zip]]<BR> | ||
** SEMs of 2:1 ZEP dosage array: [[file:2_to_1 ZEP SEMs.zip]]<BR> | ** SEMs of 2:1 ZEP dosage array: [[file:2_to_1 ZEP SEMs.zip]]<BR> |
Revision as of 14:12, 25 February 2013
Proximity Correction
- Proximity Effect Correction Experiment Updated
- SEMs of Pure ZEP dosage array: File:Pure ZEP SEMs.zip
- SEMs of 2:1 ZEP dosage array: File:2 to 1 ZEP SEMs.zip
- SEMs of Pure ZEP dosage array: File:Pure ZEP SEMs.zip
- Proximity Correction PPT Past Versions
login to BEAMER server:
128.111.192.142
u:bowers
p:femto
Run a monte carlo simulation of the "substrate" and resist you are using in MC^3.
For example: ZEP(2k) on 500nm SOI with 1um BOx.
1) Use the drop down tab to select PENELOPE.
2) Build your layer stack in the PELELOPE GUI. z-Resolution must be an integer multiple of the thickness.
3) Check Save the result for the resist layer, for this example we have saved the "ZEP520_" layer
Return to Cleanroom_Equipment