E-Beam Lithography (EBL)
From OptoelectronicsWiki
Revision as of 11:51, 29 June 2013 by 128.111.239.120 (Talk)
Proximity Correction
- SEMs
- SEMs - 1st Chips - Pure ZEP dosage array: File:Pure ZEP SEMs.zip
- SEMs - 1st Chips - 2:1 ZEP dosage array: File:2 to 1 ZEP SEMs.zip
- SEMs - 2nd Chips - Pure ZEP dosage array: File:2ndChips Pure Zep-EBL Correction 3 22 13.zip
- SEMs - 2nd Chips - 2:1 ZEP dosage array: File:2ndChips 2 to 1 ZEP SEMs.zip
- SEMs - 1st Chips - Pure ZEP dosage array: File:Pure ZEP SEMs.zip
- Excel Data : File:ProximityData.xlsx
- Excel Data : File:ProximityData.xlsx
- BeamerCal5 - Photonic crystal and grating arrays: File:5 beamercal5.zip
login to BEAMER server:
128.111.192.142
u:bowers
p:femto
Run a monte carlo simulation of the "substrate" and resist you are using in MC^3.
For example: ZEP(2k) on 500nm SOI with 1um BOx.
1) Use the drop down tab to select PENELOPE.
2) Build your layer stack in the PELELOPE GUI. z-Resolution must be an integer multiple of the thickness.
3) Check Save the result for the resist layer, for this example we have saved the "ZEP520_" layer
Return to Cleanroom_Equipment