Difference between revisions of "Equipment"
From OptoelectronicsWiki
(→Attenuators) |
(→Amplifiers) |
||
Line 198: | Line 198: | ||
== Amplifiers == | == Amplifiers == | ||
* [[Calmar L-band EDFA]] | * [[Calmar L-band EDFA]] | ||
+ | |||
+ | * [[IPG EAD-2K-C]] C-band EDFA with 33dBm max. output power | ||
== Attenuators == | == Attenuators == |
Revision as of 23:11, 26 April 2011
Equipment that has been checked out of the lab: doc.
Equipment that is stored in the trailer: docx.
Contents
Electrical
Microwave
Electrical spectrum analyzers
- HP 70000 (2) - these have an optical input port as well. They need to be installed in a mainframe.
RF signal generators
- Fluke 6060 (2)
- HP 8340B synthesized sweep generator (10 MHz to 26.5 GHz)
Data Tx/Rx
- Quantum DD1 divider delay unit
Amplifiers
- HP 8349B (2-20GHz)
- EIN 300L (kHz-110MHz)
Network analyzers
- HP 8703A (lightwave component analyzer)
- Agilent E8364A (PNA with LCA attachment)
- PNA-X
C-V meters
Cables & connectors
- See the attached document for instructions on microwave connector care.
Other
- HP 70820A microwave transition analyzer (essentially an oscilloscope with excellent rise-time measuring capabilities)
DC
Voltage/current sources
- Keithley 2400 series source meters
- Keithley 2600 series source meters
- ILX LDP 3811 pulsed current source
- ILX LDX-3207B laser diode driver
- LDX-3220 laser diode driver
- Light Control Instruments 502 laser diode driver
- SDL-8610-D laser diode driver (for SDL-8610 850 nm lasers)
- ILX FOA-8100 fiber amplifier driver
- LCI-102 current source
- New Focus 0901 current source
- Agilent E3640 DC voltage source
- HP 6205C dual DC voltage source
- Kikusui PAB 18-3 DC voltage source
- Lambda LA-200 DC voltage source
- LDC9003A DC voltage source
- Bertran 215 High-voltage DC source
Multimeters
- HP 4338B milliohm-meter
- Keithley 6485 picoammeter
- Keithley 485 picoammeter
- Fluke 8012A multi-meter
- HP 3468B multi-meter
- HP 3478A multi-meter
- Keithley 175 multi-meter
Semiconductor parameter analyzers
- HP 4145A Semiconductor parameter analyzer
Temperature controllers
AC
Oscilloscopes
- Hitachi V-355 oscilloscope
- Tek 11801 digital sampling scope
Pulse generators
- HP 8116A (2)
Lock-in amplifiers
Other amplifiers
- SR570 current pre-amplifier
Optical
OSAs
Fiber optics
Tunable filters
Isolators
Switches
- HP 86060C lightwave switch
Detectors
High-speed
Power meters/broad area PDs
- Newport 835 power meter
- HP 438A power meter
Misc. characterization
Cameras
- Hamamatsu streak camera (parts in trailer)
Optical sources
Broadband sources
- SLED (example)
- ASE source
CW lasers
- Agilent TLS (example)
- Emcore 1614W (2): 1310nm
- Lightwave Electronics 120-04 (2): 1319nm
- SDL-8610 (2): 850nm, 100mW, fiber-coupled
Pulsed lasers
- Calmar mode-locked laser (example)
Amplifiers
- IPG EAD-2K-C C-band EDFA with 33dBm max. output power
Attenuators
- Agilent 81577A (2) high-power attenuator
- HP8156A (at least 2)
Modulators/transmitters
High-speed
- SHF 4003A 40Gb/s transmitter
Low-speed
- Brimrose AOM Acousto-optic modulator
- IntraAction ME AOM driver
- Oriel chopper Chopper + controller
- SR540 chopper and controller
Other
Communication
We have several USB/GPIB converters. The one from Agilent is not intuitive to install. Follow the instructions here:Agilent 82357A (USB/GPIB)
- Black Box RS232/GPIB converter
Opto-mechanics
- Newport 855C programmable controller (for up to 4 mechanical actuators)
Water coolers
Optical tables
Safety
First aid kit (near fume hood)
Radiation safety goggles at various wavelengths (in bin above sample cabinet)