Difference between revisions of "Orbits Ethernal"
From OptoelectronicsWiki
| Line 4: | Line 4: | ||
[[Media:Scanorb0340.pdf|Manual]] | [[Media:Scanorb0340.pdf|Manual]] | ||
| + | |||
| + | === Piezo tuning === | ||
| + | |||
| + | These are fiber lasers with external piezo cavities that can be tuned over ~10GHz. The procedure for doing this is outlined in the manual, but basically you plug a DC power supply in to the back of the laser power supply, set a voltage recommended by the specific laser's data sheet, and then turn on the laser. Here are the data sheets for each of the three lasers we have, organized by serial number: | ||
| + | |||
| + | [[Media:Orb_M1133spec2.pdf|1133]] | ||
| + | |||
| + | [[Media:Orb_M1134spec-3.pdf|1134]] | ||
Revision as of 11:33, 31 May 2011
Full model number: ETH-100-1537.4-5 PZT
Piezo tuning
These are fiber lasers with external piezo cavities that can be tuned over ~10GHz. The procedure for doing this is outlined in the manual, but basically you plug a DC power supply in to the back of the laser power supply, set a voltage recommended by the specific laser's data sheet, and then turn on the laser. Here are the data sheets for each of the three lasers we have, organized by serial number:
