Revision as of 11:20, 14 February 2012 (edit) Molly (Talk | contribs) m (→‎Network analyzers) ← Older edit		Revision as of 11:22, 14 February 2012 (edit) (undo) Molly (Talk | contribs) m (→‎Broadband sources) Newer edit →
Line 214:		Line 214:
	* ASE source		* ASE source
		+
		+	* Hg lamp
		+
	=== CW lasers ===		=== CW lasers ===

---

Revision as of 11:22, 14 February 2012

Equipment that has been checked out of the lab: doc.

Equipment that is stored in the trailer: docx.

Equipment that is stored in the third floor office. Check here for spare computer parts: docx.

Electrical

Microwave

Electrical spectrum analyzers

• Rohde & Schwarz FSU

• Agilent E4407B

• HP 70000 (2) - these have an optical input port as well. They need to be installed in a mainframe.

RF signal generators

• Agilent E8257D

• Agilent 8673D

• Rohde & Schwarz SMB 100A (2)

• Rohde & Schwarz SMF 100A

• Fluke 6060 (2)

• HP 8340B synthesized sweep generator (10 MHz to 26.5 GHz)

Data Tx/Rx

• Quantum DD1 divider delay unit

Amplifiers

• HP 8349B (2-20GHz)

• EIN 300L (kHz-110MHz)

Network analyzers

• HP 8703A (lightwave component analyzer)

• Agilent E8364A (PNA with LCA attachment)

• PNA-X HP N52454A (10MHz - 50GHz)

• We also have an HP 8510A (45MHz - 26.5 GHz) that has been donated to the microwave teaching lab in HFH.

C-V meters

• HP 4284A

Cables & connectors

• See the attached document for instructions on microwave connector care.

Other

• HP 70820A microwave transition analyzer (essentially an oscilloscope with excellent rise-time measuring capabilities)

DC

Voltage/current sources

• Keithley 2400 series source meters

• Keithley 2600 series source meters

• ILX LDP 3811 pulsed current source

• ILX LDX-3207B laser diode driver

• LDX-3220 laser diode driver

• Light Control Instruments 502 laser diode driver

• SDL-8610-D laser diode driver (for SDL-8610 850 nm lasers)

• ILX FOA-8100 fiber amplifier driver

• LCI-102 current source

• New Focus 0901 current source

• Agilent E3640 DC voltage source

• HP 6205C dual DC voltage source

• Kikusui PAB 18-3 DC voltage source

• Lambda LA-200 DC voltage source

• LDC9003A DC voltage source

• Bertran 215 High-voltage DC source

Multimeters

• HP 4338B milliohm-meter

• Keithley 6485 picoammeter

• Keithley 485 picoammeter

• Fluke 8012A multi-meter

• HP 3468B multi-meter

• HP 3478A multi-meter

• Keithley 175 multi-meter

Semiconductor parameter analyzers

• HP 4145A Semiconductor parameter analyzer

Temperature controllers

• Oxford ITC503

• ILX LDT-5412

• ILX LDT-5948

• ILX LDT-5910

• Light Control Instruments 320

• Lightwave microsystems TC

• Lakeshore 805

AC

Oscilloscopes

• HP 54503A

• Hitachi V-355 oscilloscope

• Tek 11801 digital sampling scope

• Tek 5104B oscilloscope

Pulse generators

• Agilent 33250A Function generator to 80MHz

• HP 8116A (2) function generators to 50MHz

• HP 214B

Lock-in amplifiers

• EG&G 5210

• Stanford Research SR830 DSP

Other amplifiers

• SR570 current pre-amplifier

Optical

OSAs

• HP 71451A

• Agilent 86142B

Fiber optics

Tunable filters

• JDSU TB4500 (2) 1535-1565 nm, F-P type

• Koshin FC-1560B-1-1 (1) 1540-1560 nm (2 filters, 1 housing)

• Santec OTF (4) 1535-1565 nm, various bandwidths, probably membrane

• Agiltron FOTF-023121333 (1) 1270-1345 nm, 1nm 3dB bandwidth, IL = 2.1~2.8dB, probably membrane

Isolators

Polarizers

• OZopticsPolarizers Polarizers from OZ optics

Polarization beam splitters

• 9/125-SPP-1550-PBS-50-3A3U3U: from "ozoptics", one SMF in (APC)/two PMF (UPC) out; 50 dB reflection;

Switches

• HP 86060C lightwave switch

Detectors

High-speed Measurement

• Agilent LCA N4373A Lightwave component analyzer (DC - 67 GHz) - attached to the Agilent E8364A

• Agilent LCA xxx Lightwave component analyzer (DC - 26.5GHz)

Power meters/broad area PDs

• Newport 835 power meter

• HP 438A power meter

Misc. characterization

• Wm100 omega meter
• 5-14B Autocorrelator

Cameras

• Goodrich KTS

• Hamamatsu streak camera (parts in trailer)

Optical sources

Broadband sources

• SLED (example)

• ASE source

• Hg lamp

CW lasers

1550 nm

• Agilent TLS (example)

• Orbits Ethernal fiber lasers (3), all around 1537 nm

1310 nm

• Emcore 1614W (2): 1310nm

• Lightwave Electronics 120-04 (2): 1319nm

• ThorLabs 1310nm tunable laser, (ECL)

1060 nm

• ThorLabs 1060nm tunable laser, (ECL)

780 nm

• ThorLabs 780nm tunable laser, (ECL)

Other

• SDL-8610 (2): 850nm, 100mW, fiber-coupled

Pulsed lasers

• Calmar mode-locked laser

• PriTel PFL-1550 femtosecond mode-locked laser

Amplifiers

• Calmar L-band EDFA

• IPG EAD-2K-C C-band EDFA with 33dBm max. output power

• IPG EAR-2K-C (2) C-band EDFA with 33dBm max. output power

• MPB EFA-P21F C-band gain-flattened EDFA wtih 21 dBm max. output power

• Thorlabs 1132P BOA O-band (1300nm) booster SOA with ~17 dBm max. output power

Attenuators

• Agilent 81577A (2) high-power attenuator

• HP8156A (at least 2)

• NetTest attenuator

Modulators/transmitters

High-speed

• SHF 4003A 40Gb/s transmitter

• JDSU 10024180 intensity modulator

Low-speed

• Brimrose AOM Acousto-optic modulator

• IntraAction ME AOM driver

• Oriel chopper Chopper + controller

• SR540 chopper and controller

Other

Communication

We have several USB/GPIB converters. The one from Agilent is not intuitive to install. Follow the instructions here:Agilent 82357A (USB/GPIB)

• Black Box RS232/GPIB converter

Opto-mechanics

• Newport 855C programmable controller (for up to 4 mechanical actuators)

Water coolers

Optical tables

Safety

First aid kit (near fume hood)

Radiation safety goggles at various wavelengths (in bin above sample cabinet)

Click here for a list of chemicals in the fume hood and links to their MSDSs.