Revision as of 23:17, 26 April 2011 (edit) Molly (Talk | contribs) (→‎Pulse generators) ← Older edit		Revision as of 23:35, 26 April 2011 (edit) (undo) Molly (Talk | contribs) (→‎CW lasers) Newer edit →
Line 190:		Line 190:
	* ASE source		* ASE source
	=== CW lasers ===		=== CW lasers ===
		+
		+	==== 1550 nm====
	* Agilent TLS (example)		* Agilent TLS (example)
		+
		+	* [[Orbitz Ethernal]] fiber lasers (3), all around 1537 nm
		+
		+	==== 1310 nm====
	* [[Emcore 1614W]] (2): 1310nm		* [[Emcore 1614W]] (2): 1310nm
	* [[Lightwave Electronics 120-04]] (2): 1319nm		* [[Lightwave Electronics 120-04]] (2): 1319nm
		+
		+	==== Other ====
	* [[SDL-8610]] (2): 850nm, 100mW, fiber-coupled		* [[SDL-8610]] (2): 850nm, 100mW, fiber-coupled

---

Revision as of 23:35, 26 April 2011

Equipment that has been checked out of the lab: doc.

Equipment that is stored in the trailer: docx.

Electrical

Microwave

Electrical spectrum analyzers

• Rohde & Schwarz FSU

• Agilent E4407B

• HP 70000 (2) - these have an optical input port as well. They need to be installed in a mainframe.

RF signal generators

• Agilent E8257D

• Agilent 8673D

• Rohde & Schwarz SMB 100A (2)

• Rohde & Schwarz SMF 100A

• Fluke 6060 (2)

• HP 8340B synthesized sweep generator (10 MHz to 26.5 GHz)

Data Tx/Rx

• Quantum DD1 divider delay unit

Amplifiers

• HP 8349B (2-20GHz)

• EIN 300L (kHz-110MHz)

Network analyzers

• HP 8703A (lightwave component analyzer)

• Agilent E8364A (PNA with LCA attachment)

• PNA-X

C-V meters

• HP 4284A

Cables & connectors

• See the attached document for instructions on microwave connector care.

Other

• HP 70820A microwave transition analyzer (essentially an oscilloscope with excellent rise-time measuring capabilities)

DC

Voltage/current sources

• Keithley 2400 series source meters

• Keithley 2600 series source meters

• ILX LDP 3811 pulsed current source

• ILX LDX-3207B laser diode driver

• LDX-3220 laser diode driver

• Light Control Instruments 502 laser diode driver

• SDL-8610-D laser diode driver (for SDL-8610 850 nm lasers)

• ILX FOA-8100 fiber amplifier driver

• LCI-102 current source

• New Focus 0901 current source

• Agilent E3640 DC voltage source

• HP 6205C dual DC voltage source

• Kikusui PAB 18-3 DC voltage source

• Lambda LA-200 DC voltage source

• LDC9003A DC voltage source

• Bertran 215 High-voltage DC source

Multimeters

• HP 4338B milliohm-meter

• Keithley 6485 picoammeter

• Keithley 485 picoammeter

• Fluke 8012A multi-meter

• HP 3468B multi-meter

• HP 3478A multi-meter

• Keithley 175 multi-meter

Semiconductor parameter analyzers

• HP 4145A Semiconductor parameter analyzer

Temperature controllers

• Oxford ITC503

• ILX LDT-5412

• ILX LDT-5948

• ILX LDT-5910

• Light Control Instruments 320

• Lightwave microsystems TC

• Lakeshore 805

AC

Oscilloscopes

• HP 54503A

• Hitachi V-355 oscilloscope

• Tek 11801 digital sampling scope

Pulse generators

• Agilent 33250A Function generator to 80MHz

• HP 8116A (2) function generators to 50MHz

• HP 214B

Lock-in amplifiers

• EG&G 5210

• Stanford Research SR830 DSP

Other amplifiers

• SR570 current pre-amplifier

Optical

OSAs

• HP 71451A

• Agilent 86142B

Fiber optics

Tunable filters

Isolators

Switches

• HP 86060C lightwave switch

Detectors

High-speed

Power meters/broad area PDs

• Newport 835 power meter

• HP 438A power meter

Misc. characterization

• Wm100 omega meter

Cameras

• Goodrich KTS

• Hamamatsu streak camera (parts in trailer)

Optical sources

Broadband sources

• SLED (example)

• ASE source

CW lasers

1550 nm

• Agilent TLS (example)

• Orbitz Ethernal fiber lasers (3), all around 1537 nm

1310 nm

• Emcore 1614W (2): 1310nm
• Lightwave Electronics 120-04 (2): 1319nm

Other

• SDL-8610 (2): 850nm, 100mW, fiber-coupled

Pulsed lasers

• Calmar mode-locked laser (example)

Amplifiers

• Calmar L-band EDFA

• IPG EAD-2K-C C-band EDFA with 33dBm max. output power

Attenuators

• Agilent 81577A (2) high-power attenuator

• HP8156A (at least 2)

• NetTest attenuator

Modulators/transmitters

High-speed

• SHF 4003A 40Gb/s transmitter

Low-speed

• Brimrose AOM Acousto-optic modulator

• IntraAction ME AOM driver

• Oriel chopper Chopper + controller

• SR540 chopper and controller

Other

Communication

We have several USB/GPIB converters. The one from Agilent is not intuitive to install. Follow the instructions here:Agilent 82357A (USB/GPIB)

• Black Box RS232/GPIB converter

Opto-mechanics

• Newport 855C programmable controller (for up to 4 mechanical actuators)

Water coolers

Optical tables

Safety

First aid kit (near fume hood)

Radiation safety goggles at various wavelengths (in bin above sample cabinet)