Difference between revisions of "EPHI"
From OptoelectronicsWiki
(→Splits) |
(→Overview) |
||
Line 2: | Line 2: | ||
EPHI aims to integrate ultra low-loss waveguides (SiN/SiO2 on Si developed in IPHOD) and high-Q resonators with the hybrid Silicon platform to produce a low-noise oscillator. | EPHI aims to integrate ultra low-loss waveguides (SiN/SiO2 on Si developed in IPHOD) and high-Q resonators with the hybrid Silicon platform to produce a low-noise oscillator. | ||
− | + | The first fabrication run (Shuttle Run 1 / Dev2) is an investigate short-loop to determine the best design space for tapers and rib widths in gain elements. | |
− | + | ||
− | + | ||
== Splits == | == Splits == |
Revision as of 13:32, 29 October 2012
Contents
Overview
EPHI aims to integrate ultra low-loss waveguides (SiN/SiO2 on Si developed in IPHOD) and high-Q resonators with the hybrid Silicon platform to produce a low-noise oscillator. The first fabrication run (Shuttle Run 1 / Dev2) is an investigate short-loop to determine the best design space for tapers and rib widths in gain elements.
Splits
Shuttle run 1 / Dev2
Mask set
Mask splits
Processing
EPHI Shuttle run-1 / Dev2 (SOA only)
Process ID | Process flow | Process follower | Description |
---|---|---|---|
WG etch | Complete Flow A | Si WG etch | Rib waveguide formation, Alignment marks. |
VC etch | Si VC etch | Vertical channel etch | |
Bonding | Bonding | Plasma assisted wafer bonding guide - Author:Michael D | |
InP-mesa etch | P-mesa etch | Mesa etch to top SCH layer | |
QW wet etch | QW etch | Active layer wet etch | |
N-metal deposition | N-metal deposition | N-metal (Ni/Ge/Au/Ni/Au) | |
Oxide Planarization & Via formation | Planarization & Via etch | 1um oxide deposition & via etch | |
P-/Probepad metal deposition | Probepad metallization | P-/probepad metal stack (Pd/Ti/Pd/Au) |
Process ID | Process flow | Process follower | Description |
---|---|---|---|
WG etch | Complete Flow B | Si WG etch | Rib waveguide formation, Alignment marks. |
VC etch | Si VC etch | Vertical channel etch | |
Bonding | Bonding | Plasma assisted wafer bonding guide - Author:Michael D | |
P-metal deposition | p-metal deposition | P-metal stack (Pd/W) | |
InP-mesa etch | P-mesa etch | Mesa etch to top SCH layer | |
QW wet etch | QW etch | Active layer wet etch | |
N-metal deposition | N-metal deposition | N-metal (Ni/Ge/Au/Ni/Au) | |
Oxide Planarization & Via formation | Planarization & Via etch | 1um oxide deposition & via etch | |
Probepad metal deposition | Probepad metallization | Probepad metal stack (Pd/Ti/Pd/Au) |
Characterization
Dev2 SOA shortloop - look-ahead (no proton implant)
look-ahead (no proton implant)
Dev2 SOA shortloop - after proton implant
first chips (proton implanted on column 3)